New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Jacksonville pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Jacksonville Beach, FL | Meridian Windows and Doors Jacksonville
We’re Meridian Windows and Doors Jacksonville, and we provide independent CGI windows and doors service throughout Jacksonville Beach. Our techs work on CGI estate and classic impact lines every week here, and we know precisely how salt spray, humidity, and hurricane codes affect their aluminum frames, rollers, and seals. If you need repair, glass replacement, or our Window Replacement in Jacksonville Beach, call (904) 513-9670 for a free estimate with a written price before any work starts.
Why Jacksonville Beach Residents Choose Us for CGI Service
CGI builds impact-rated windows and doors meant for coastal Florida, but living two blocks off the ocean tests even the best hardware. We’ve spent years servicing CGI sales & service across Jacksonville Beach, from older concrete block homes near Beach Boulevard to elevated stilt builds along 1st Street South. Elliot Vance, our owner, learned window and door installation at Los Angeles Trade-Technical College and has spent nearly three decades measuring, fitting, and installing fenestration. He and our crew know CGI’s Estate Collection and Classic Collection lines well enough to diagnose a failed seal or a corroded track without guesswork. We’re an independent service provider, not a manufacturer affiliate, so our repair-versus-replace guidance is based on what the hardware actually shows us on your home. Every visit includes a written diagnosis and a quoted price before you decide anything.
Common CGI Windows & Doors Problems We Solve in Jacksonville Beach
Here is what we actually see on CGI products in Jacksonville Beach, block by block:
- Corrosion and pitting on aluminum frames. Salt spray here is constant, especially on lower floors of oceanfront and intracoastal homes. CGI’s aluminum frames hold up better than most, but even they will pit over time when covered in salt film. We can often clean and re-seal minor pitting; once structural integrity is compromised, replacement becomes the honest answer.
- Fogging between panes in laminated impact glass. Jacksonville Beach humidity and thermal cycling stress the seal on older impact glazing. When the seal fails, trapped moisture fogs the glass. This requires replacing the insulated glass unit, and we use genuine CGI glass so the impact rating stays intact.
- Sticking or seized rollers in sliding doors. Sand and salt grit work into the track and grind the rollers down. We replace them with corrosion-resistant aftermarket rollers and clean the track, which usually brings the door back to a one-hand operation.
- Worn weatherstripping and leaking sills. Salt air eats rubber and foam weatherstripping faster here than inland. You’ll feel the draft or see condensation on the interior glass. We replace these with marine-grade materials that hold up longer within a few hundred yards of the surf.
- Failed multipoint locks and handles. Salt corrosion causes internal lock mechanisms to bind or snap. We stock genuine CGI multipoint hardware for these repairs because aftermarket parts rarely match the rating or fit.
CGI Service in Jacksonville Beach: What Local Conditions Mean for Your Equipment
Jacksonville Beach building codes require impact-rated windows and doors for any new construction or substantial remodel east of the Intracoastal Waterway. But many pre-1990 stilt homes and beach cottages still have unprotected openings, and that is where we do most of our CGI retrofit work. Older wood-framed openings are rarely square, and a CGI impact window will not perform to its DP rating if it is shoved into a racked opening with a bead of caulk. We square the rough opening, shim tightly, and flash the perimeter with stainless steel fasteners and foam backer rod. On a recent job on 1st Street South, our crew pulled a pair of original jalousie windows from a 1960s concrete block ranch and set CGI Estate Collection single-hung impact units in their place. The salt air had eaten through the old aluminum frames and the glass sat loose in the sashes. The new windows carry the Miami-Dade NOA this zone demands, and the owner’s AC load dropped noticeably.
CGI Models & Products We Service in Jacksonville Beach
We service the CGI Estate Collection impact windows, CGI Classic Collection impact windows, CGI Estate Collection sliding glass doors, and CGI Targa Series impact windows. For critical components like impact glass and multipoint locks, we use genuine CGI parts because aftermarket versions rarely match the DP rating. For non-structural hardware like rollers and weatherstripping, we use high-quality corrosion-resistant aftermarket parts. We keep common CGI hardware in local stock so most Jacksonville Beach repairs happen in one visit, not three.
CGI Service Pricing in Jacksonville Beach
Here is what CGI service typically costs in Jacksonville Beach:
- Weatherstripping replacement or roller swap: $120 – $350 per opening, depending on door or window size.
- Impact glass replacement for a fogged or cracked lite: $450 – $950 per panel, hinging on size and tint.
- Multipoint lock replacement: $250 – $600 per door, including the genuine CGI hardware.
- Full frame replacement with a CGI Estate impact window: $1,100 – $2,400 per opening installed, depending on size, frame material, and the condition of your rough opening.
- Full sliding glass door replacement with a CGI Estate impact door: $3,500 – $7,800 installed, depending on width, configuration, and whether the old frame can be pulled cleanly.
Your free estimate includes a written line-item price before any work starts. Call (904) 513-9670 and we will walk the job with you, no charge.
Serving Jacksonville Beach, FL - Our Local Coverage Area
We’re based in the Jacksonville Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Jacksonville Beach
You can replace just the glass if the frame is still square and corrosion-free. We order genuine CGI laminated insulated glass, and the existing frame goes back into service with the same DP rating. If the aluminum frame is pitted or warped, a full replacement is the safer call. Call (904) 513-9670 for a quick in-person assessment.
Nearly always it is sand and salt grit packed into the roller track, or the rollers themselves have corroded. We clean the track, replace the rollers with corrosion-resistant parts, and realign the panel. If the frame itself is corroded through, we will tell you plainly and quote a replacement door.
If your windows carry a Miami-Dade NOA and were installed after the Florida Building Code’s impact requirements for this zone, they likely comply. But older openings, especially on pre-1990 homes east of the Intracoastal, often will not. We review the labels on every window during our visit and give you a straight answer.
In most cases, yes. We square the rough opening, shim it tight, and handle our Window Installation in Jacksonville Beach with full-perimeter flashing. The existing wall stays intact. This is exactly the retrofit work we do on Jacksonville Beach’s older concrete block and wood-frame beach houses.
Rinse frames and tracks with fresh water every few months, especially on lower floors. Inspect weatherstripping each year and replace anything cracked or stiff. We offer a maintenance visit that covers all of this for a flat rate; call (904) 513-9670 to schedule one.
Service Areas Near Jacksonville Beach
Our crew covers Jacksonville Beach service area as well as Neptune Beach, Ponte Vedra Beach, and Atlantic Beach. We also serve CGI service in Neptune Beach and CGI service in Jacksonville for homeowners from San Marco to the Southside corridor.
Book Your CGI Service in Jacksonville Beach Today
We show up as promised, put the price in writing before we start, and stand behind every repair and installation for a full year. Call (904) 513-9670 to schedule your free estimate. Measure twice, quote once, everything after that is just showing up.
Written by Elliot Vance, Owner at Meridian Windows and Doors Jacksonville, serving Jacksonville Beach since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Jacksonville
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.