New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Jacksonville pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why Jacksonville Homeowners Choose CGI Windows & Doors
Meridian Windows and Doors Jacksonville is an independent Jacksonville Cgi service provider, not a manufacturer-authorized dealer, and our crews work on CGI hurricane-rated windows and doors across Jacksonville every week. We service and install Estate Collection casements, picture windows, single hungs, and Targa Series impact entry doors, with factory-spec parts and a written 365-day guarantee on every job. If you own CGI products and need a repair, a replacement, or an honest second opinion on whether to fix or swap a failed unit, call us at (904) 513-9670. We know these products down to the frame-join fatigue points, and we’ll tell you straight what is wrong and what it costs before any work starts.
Jacksonville’s climate punishes windows and doors harder than most of the country. High humidity, salt-tinged air, gale-force gusts off the Atlantic, and summer heat that sits on a frame like a skillet all take a toll on even the best impact-rated products. CGI builds tough fenestration, but “tough” is not “maintenance-free forever.” Our technicians see the same failures repeat across Arlington, San Marco, Atlantic Beach, Neptune Beach Cgi service areas, and the Southside corridor: stress fractures at fusion-welded corners, IGU seal breakdown, and roller channel deformation on multi-point locking doors. We diagnose those problems quickly because we see them constantly. That is the difference between a general handyman and a crew that works on CGI product lines specifically.
Why Trust Meridian Windows and Doors Jacksonville for Your CGI Windows & Doors?
Our Jacksonville crews work on CGI hurricane-rated fenestration daily, especially Estate Collection casements, Estate Picture windows, and Targa Series doors, so we know the pressure ratings, Florida Product Approval numbers, and frame-join fatigue points better than any general contractor. Elliot Vance, who owns Meridian Windows and Doors Jacksonville, learned the trade at Los Angeles Trade-Technical College and spent nearly three decades measuring, fitting, and installing windows and doors before his crews ever touched a CGI unit in Florida. He runs every job on the same principle: measure twice, quote once, everything after that is just showing up.
We do not improvise on CGI work. When we pull an Estate casement, we inspect the fusion-welded miter, check the crank mechanism for gear wear, and verify the frame is still square against the rough opening before we touch a screw. We order factory-spec replacement parts because CGI profiles are milled to tight tolerances. We back every repair and installation with our written 365-Day Done Right Promise, which says plainly: if it is not done right, we come back at no charge. You also get a written price before work starts, not a ballpark figure that moves after the crew arrives. That is how we run every job, and it is what Jacksonville homeowners tell us they were missing from the last contractor.
Common CGI Windows & Doors Problems We Fix in Jacksonville
- Stress fractures at fusion-welded corners on Estate Collection casements. This is the most common CGI failure we see in Jacksonville, and it happens faster in salt-air neighborhoods like Atlantic Beach and along the Intracoastal. The fusion-welded miter at the frame corner can micro-crack after years of repeated cycling in high humidity, and the first symptom is a stiff crank or visible daylight at the lower corner. If you see either, get it looked at before the crack migrates through the frame profile.
- Roller channel deformation on Targa Series impact entry doors. Targa doors use a multi-point locking system that rides on rollers in a steel channel. After years of gale-force gusts and daily use, that channel can deform slightly, which makes the door feel gritty or sticky when you throw the lock. It is rarely a slab failure; usually we re-true the channel, replace the rollers, and the door locks like it did new.
- IGU seal failure on Estate Collection picture windows. If you see fogging between the panes or a white crystallization at the bottom of the glass, the insulated glass unit’s seal has failed. This is the classic Estate picture window failure mode in humid climates, because sealants work against constant thermal expansion. The glass usually gets replaced as a full IGU assembly, not just a pane.
- Weatherstripping compression set on Estate single hungs. Rubber and foam bulb weatherstripping on the sill and meeting rail compresses over time and loses its rebound. In Jacksonville, that means air and water intrusion at the sill during the afternoon thunderstorms we get from June through September. We replace the weatherstripping with factory-spec profiles, and the window seals properly again.
- Corroded steel lintels above window openings in older Jacksonville homes. This one is not a CGI product issue, but we see it constantly in mid-century concrete-block ranch houses in Arlington and the Westside. The original steel lintel over the window opening rusts and swells after decades of humid, salt-tinged air, pushing on the CGI frame and causing binding or visible gaps. We inspect the lintel before any replacement or full-frame work.
CGI Parts & Our Repair-vs-Replace Approach
Our preference is factory-spec replacement parts: sash balances, multi-point lock gearboxes, and full IGU assemblies. CGI profiles are milled to tight tolerances, and an off-brand sash balance that is a fraction off will bind a window that the manufacturer never intended to bind. We stock common parts locally for fast turnaround, which means most Estate casement and single hung repairs in Jacksonville are done in a single visit. We only switch to proven aftermarket hardware when CGI parts are discontinued and no factory match exists. When that happens, we tell you before we order, and we write the substitution on your quote.
The harder call is repair versus replace. We are straight about it. If an Estate window has a failed IGU but a sound frame, we replace the glass unit and save you the cost of a full tear-out. If the frame has cracked at a fusion-welded corner or the frame profile is so fatigued that a sash rebuild is not going to hold, we tell you a full frame replacement is the honest fix. We do not push replacement because it is a bigger ticket. We push the repair that lasts. Call (904) 513-9670 and we will give you a written diagnosis and a number to think about.
Our CGI Service Process – Step by Step
- 1
Diagnosis. One of our uniformed, background-checked technicians arrives, walks the opening, and identifies the failure. On an Estate casement in Atlantic Beach last year, the homeowner reported a loose crank and daylight at the lower corner; our tech found the fusion-welded frame had micro-cracked at the miter. The diagnosis drove everything after.
- 2
Written quote. We put the repair or replacement price on paper before any work starts. The number does not move at the door. You decide with a fixed cost in front of you.
- 3
Factory-spec repair or full replacement. We order the right part: a factory replacement vent panel, a full IGU assembly, a lock gearbox, or a complete frame for a full-frame replacement. Then we install it to CGI’s frame tolerances and re-bed flashing and sealants for Jacksonville’s wind-driven rain.
- 4
Test and verify. We cycle the window or door through its full operation, check that the locking points engage, and inspect the weatherstrip seal. If water or air is moving, we find it before we leave.
- 5
Written warranty. Every job is covered in writing for 365 days under our Done Right Promise. If it fails within that period, the second visit is free. No fine print about labor exclusions.
CGI Products We Service & Install in Jacksonville
We service and install the full CGI Estate Collection and Targa Series lineup in Cgi in Jacksonville Beach and throughout Jacksonville: Estate Collection casement windows, Estate Collection picture windows, Estate Collection single hung windows, and Targa Series impact entry doors. That covers hurricane impact windows across the footprint, full-frame replacements on older Estate units, and door service on Targa multi-point systems. We stock common sash balances, weatherstripping profiles, lock hardware, and full IGU assemblies locally, which shortens turnaround for most Jacksonville repairs to a single visit. If your CGI product is not on this list, call us anyway; we will tell you straight whether it is something our crews can service.
We Also Service These Brands
CGI is a strong line, but it is not the only one we work with. Meridian Windows and Doors Jacksonville is stocked across eight manufacturer lines, and our crews also service and install PGT, CWS, ES Windows, and ECO Window Systems products. If your home has a mix of brands across different openings, we spec the right window or door for each opening instead of forcing one brand everywhere.
FAQs – CGI Windows & Doors Service in Jacksonville
No. We are an independent CGI service provider; we are not authorized by or affiliated with CGI, and we do not represent ourselves as a manufacturer dealer. We work on CGI products because our Jacksonville crews have years of hands-on time with the Estate Collection and Targa Series, and because we stock factory-spec parts for them. What we give you is a written price, a written guarantee, and a crew that knows exactly what a CGI frame should look like when it is right.
The usual cause is a stress fracture at the fusion-welded frame corner, often at the lower miter, made worse by Jacksonville’s humid, salt-tinged air. The crack lets the frame flex unevenly, and the sash binds against the frame as it closes. If the crank feels fine but the window still binds, we check the hinge track and the operator gearbox. Either way, a stiff Estate casement is a fail sign to address before the frame crack runs further. Call (904) 513-9670 and we will diagnose it and put the fix in writing.
In most cases the outer pane is part of a laminated impact glass assembly, and the repair is to replace the glass unit within the slab, not the entire door. A cracked outer pane does not automatically mean a new Targa slab. The slab gets replaced when the frame stiles or the multi-point lock channel have failed, which is a structural issue rather than a glazing issue. We inspect the slab first, then quote the glass replacement or the slab replacement honestly.
White crystallization or fog between the panes means the insulated glass unit’s seal has failed, and moisture has entered the air space. The desiccant inside the IGU eventually saturates and leaves that white deposit on the glass. This is a common Jacksonville failure because high humidity and solar heat cycles stress the edge seals. The correct repair is a full IGU replacement, not a reseal or a single-pane swap.
We use factory-spec parts where they exist: sash balances, weatherstripping profiles, and glazing. CGI profiles are milled to tight tolerances, and the difference between a factory balance and a generic “fits most” balance is a window that stays up versus one that creeps. When a CGI part is discontinued, we switch to proven aftermarket hardware and tell you before we order it, in writing. You will never find generic parts masquerading as factory on our quotes.
The check depends on the frame’s condition. If the existing frame is square, the miter joints are solid, and the rough opening is sound, an insert keeps cost down and preserves the opening. If the frame has cracked at a fusion-welded corner, the frame profile has moisture damage, or the rough opening shows rusted lintel issues (common in mid-century Jacksonville block homes), a full frame replacement is the honest fix. We inspect the frame and opening and tell you which route we would take on our own house, including when our Window Replacement services are the right call. For an exact quote, call (904) 513-9670, estimates are free.
Most single unit repairs in Jacksonville run between $90 and $275 for weatherstripping, hardware, and operator fixes, while full IGU replacements typically land in the $375 to $900 per unit range depending on glass size and impact rating. Full frame replacements on Estate windows and Targa doors usually run higher, commonly $1,400 to $3,800 per opening in the Jacksonville market for tear-out, new impact-rated unit, flashing, and trim. Those are the ranges we quote from, but the only number that matters is the written one we give you after inspecting your specific openings. Call (904) 513-9670 for a free estimate, and we will put your exact number on paper before any work starts.
Book Your CGI Service in Jacksonville, FL
If you own CGI windows or doors in Jacksonville and something is not operating right, call Meridian Windows and Doors Jacksonville at (904) 513-9670. We will diagnose the failure, put the price in writing, and stand behind the work for a full year. A meridian is a fixed line you measure everything against; that is what the name means and how we run every install.
Written by Elliot Vance, Owner at Meridian Windows and Doors Jacksonville, serving Jacksonville since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Jacksonville
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.