New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Jacksonville pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Jacksonville, FL | Meridian Windows and Doors Jacksonville
We provide independent CGI windows and doors service across Jacksonville, from single-panel repairs to full impact-rated retrofits. What makes our CGI work here different? We understand how these units fail in Jacksonville’s specific conditions: salt-humid air, hurricane-driven rain, and concrete-block openings with corroding steel lintels. If you own a CGI Estate, Targa, Sentinel, or Sovereign window or door, we service it without leaning on any factory warranty. Call (904) 513-9670 for a written quote.
Why Jacksonville Residents Choose Us for CGI Service
Most window companies in Jacksonville will happily sell you a new unit. We take a different approach: we fix what’s fixable first. Elliot Vance, our owner, learned the trade at Los Angeles Trade-Technical College and spent nearly three decades measuring, fitting, and installing windows and doors before bringing that discipline to Jacksonville. His crew has worked everywhere from San Marco bungalows to newer Southside builds, and the standard is the same on every job: measure twice, quote once. If a CGI frame is structurally sound and the glass is intact, we repair it with OEM CGI weatherstripping and rollers. When the seal has failed or the frame is pitted through, we tell you straight and recommend replacement with an impact-rated CGI product. We’re part of the Garrison Partners family, held to The Garrison Standard since 2009, and every job carries a written 365-Day Done Right Promise. The price goes on paper before work starts, and it does not move at the door.
Common CGI Windows & Doors Problems We Solve in Jacksonville
Here’s what we see most often on CGI units in this city:
- Fogging and seal failure in Estate and Targa insulated glass units. Along the Intracoastal and beachside zones, salt-laden air accelerates desiccant exhaustion and edge-seal breakdown. We replace failed IGUs and reseal the perimeter, and we’ll tell you honestly if the frame’s too far gone to save.
- Binding or slumping horizontal roller panels in Sovereign and Sentinel sliders. Humid air swells wood surrounds or corrodes original aluminum tracks, especially in Arlington and Westside homes that swapped jalousie windows for sliders years ago. We clean, realign, and replace rollers with OEM parts when the frame allows.
- Cloudy film and sealant shrinkage on painted aluminum frames. West-facing walls catch full sun in Jacksonville, and Sovereign and Estate frames show it: oxidized finish, dried sealant at the corners, and air infiltration. We strip, reseal, and replace gaskets.
- Sagging or misaligned casement sashes on Estate and Targa units. Wind-driven rain and thermal cycling loosen hinges and warp sash corners over time. Often the steel lintel above the opening is corroded too, and that’s a Jacksonville-specific problem we check every time.
- Fogged or scratched impact glass. Rock chips, pressure-washer damage, and failed seals are common across Jacksonville’s sprawling subdivisions. We source replacement glass and install it to CGI’s original spec.
CGI Service in Jacksonville: What Local Conditions Mean for Your Equipment
Here’s a fact that shapes CGI work in Jacksonville more than almost anywhere else in Florida: in Arlington and Westside neighborhoods, a large share of original jalousie windows are set into concrete-block openings with steel lintels above them. Those lintels corrode from decades of humid, salt-tinged air. When a technician retrofits a CGI impact unit into that opening without checking the lintel first, the rusted header can crack the new frame within a season. We’ve seen it happen. Our crew pulled three single-pane jalousie units from a 1962 ranch off Cesery Boulevard in Arlington and found the steel lintel over the bedroom opening so rusted it had bowed a quarter inch downward. We cut out the corroded section, welded in a new galvanized lintel, then set a CGI Targa impact slider with stainless rollers into the same opening. Six months later, the homeowner called us back because her energy bill had dropped by a third, and the only thing we had to adjust was a shade bracket. That’s the difference between knowing CGI products and knowing Jacksonville’s houses.
CGI Models & Products We Service in Jacksonville
We work on the full CGI sales & service range, including Estate Collection, Targa Series, Sentinel Series, and Sovereign Series. When a frame is still structurally sound, we use OEM CGI weatherstripping and rollers because the tolerances are tight and aftermarket seals rarely match. For older Estate and Sovereign units with obsolete hardware, we source quality aftermarket components that meet or exceed the original spec. Our shop keeps common CGI replacement parts in local stock, so Jacksonville turnaround is measured in days, not weeks. We specialize in hurricane impact windows, vinyl impact windows, and horizontal roller and sliding impact windows across every CGI line.
CGI Service Pricing in Jacksonville
Service on CGI windows and doors in Jacksonville typically falls into these ranges:
- Roller replacement on a horizontal slider: $140 – $260 per panel, including parts and labor.
- Weatherstripping and seal replacement on one window: $90 – $190, depending on the model and frame condition.
- IGU glass replacement on an Estate or Targa unit: $380 – $750 per sash, depending on glass size and Low-E spec.
- Full impact window retrofits with lintel remediation: $1,800 – $3,400 per opening, based on the unit, lintel condition, and access.
What drives the price? The model, the condition of the frame, the status of the lintel above the opening, and whether you’re repairing or replacing. Every free estimate includes a written line-item breakdown with the price fixed before you decide. Call (904) 513-9670 to schedule yours.
Serving Jacksonville, FL - Our Local Coverage Area
We’re based in the Jacksonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Jacksonville
Yes, in most cases. We remove the old jalousie assembly, inspect the steel lintel above the opening, and remediate any corrosion before setting the new CGI unit. If the lintel is rusted through, we cut out the bad section and weld in a galvanized replacement. The concrete block opening itself rarely needs to be rebuilt. Call (904) 513-9670 for an assessment.
CGI’s stainless roller systems hold up better than most, but no aluminum track is immune to Jacksonville’s salt-humid air over a decade or more. What we see is corrosion at the track ends and debris buildup that makes the panel bind. Regular cleaning and roller replacement every 8 to 12 years keeps the panels moving smoothly. We stock OEM rollers locally for fast turnaround.
Fogging means the insulated glass unit’s edge seal has failed and the desiccant inside is exhausted. Jacksonville’s high humidity accelerates this, especially on beachside homes. We can replace the IGU alone in most Estate frames without replacing the whole sash, as long as the frame itself is still square and the corners are intact. Call (904) 513-9670 and we’ll inspect it.
Run your hand along the sash perimeter on a windy day. If you feel air at the hinge side or along the bottom rail, that’s usually a worn gasket or loose hinge. If the leak is at the top corners and the window is hard to close, the lintel above the opening may have bowed. We check both: reseal first, then examine the header for corrosion or deflection. It’s a ten-minute diagnostic.
For a mid-century concrete-block ranch with original single-pane jalousie windows, yes. Homeowners we’ve retrofitted in Arlington and the Westside report cooling bill reductions of 20 to 35 percent after switching to CGI impact units with Low-E glass. The savings come from stopping air infiltration and reflecting solar heat. Call (904) 513-9670 for a free quote and a realistic estimate for your home.
Service Areas Near Jacksonville
We serve the full Jacksonville service area, from Arlington and the Westside to the Southside corridor. We also handle CGI service in Jacksonville Beach, CGI service in Neptune Beach, plus Yulee, Fleming Island, and Ponte Vedra Beach.
Book Your CGI Service in Jacksonville Today
Every CGI repair and installation from Meridian Windows and Doors Jacksonville comes with a written price before work starts and a 365-Day Done Right Promise in writing. Call (904) 513-9670 to schedule your free estimate. Our phones are answered by a live person, every day, around the clock.
Written by Elliot Vance, Owner at Meridian Windows and Doors Jacksonville, serving Jacksonville since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Jacksonville
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.