New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Jacksonville pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Windows & Doors in Jacksonville Beach, FL | Meridian Windows and Doors Jacksonville
We service Therma-Tru doors and windows throughout Jacksonville Beach, from oceanfront properties on 1st Street South to inland neighborhoods west of Third Street. The short answer: we’re an independent Therma-Tru service provider, not a factory store, and the work we do here is shaped by salt air, humidity, and the High Velocity Hurricane Zone code that Duval County enforces nowhere else. Call (904) 513-9670 for a written estimate before any work begins.
Why Jacksonville Beach Residents Choose Us for Therma-Tru Service
Therma-Tru doors are everywhere in Jacksonville Beach. Walk any block east of Third Street and you’ll pass a dozen fiberglass entry systems that have been holding up against salt spray and summer thunderstorms since the 1990s or earlier. We know these doors down to the corner seal pads and adjustable sill mechanisms, because Elliot Vance, our owner, has spent decades measuring, fitting, and installing windows and doors from San Marco to the beaches. He learned the trade at Los Angeles Trade-Technical College, and he built this company on tight tolerances and honest timelines. If a repair takes two hours, he tells you two hours.
Because we serve Jacksonville Beach specifically, our vans carry the parts that matter here: genuine Therma-Tru weatherstripping, replacement corner seal pads, stainless steel hinge screws, and composite adjustable sills. We don’t schedule you for a diagnosis, then order parts, then come back in three weeks. When the door needs a new threshold and latch recalibration, we handle it on the first visit. For full Therma-Tru sales & service, we spec the right model for the exposure, not the one sitting in a warehouse.
Common Therma-Tru Windows & Doors Problems We Solve in Jacksonville Beach
- Warped fiberglass door slabs from salt-heavy humidity. Therma-Tru’s fiberglass skin resists rot, but the substrate behind it can absorb moisture when the weatherstripping fails. On oceanfront homes where morning dew and salt spray are constant, we see slabs bow along the latch side, enough that deadbolts no longer seat. The door still looks fine, but it won’t close cleanly.
- Failed corner seal pads and crumbling weatherstripping. Older Therma-Tru frames use corner seal pads that degrade fast in Jacksonville Beach’s salt air. Wind-driven rain from afternoon thunderstorms finds the gap at the bottom corners and wicks into the threshold. We replace the pads and weatherstripping with genuine Therma-Tru components, not generic strip from a box store.
- Cloudy or failed insulated glass in doorlites and sidelites. South-facing Therma-Tru entry doors bake in the Florida sun. The insulated glass unit eventually loses its seal, and the telltale fog appears between the panes. We replace the glass assembly and inspect the frame glaze channel for salt corrosion at the same time.
- Corroded hinge screws and threshold screws. Many Jacksonville Beach Therma-Tru installations from the 1990s and 2000s used standard zinc-plated screws. Salt air eats through them in five to seven years. We pull the corroded screws, check the wood or block behind them, and upgrade to 316 stainless steel hardware that holds up a decade longer.
- Non-impact glass in doors that now fail HVHZ inspection. Jacksonville Beach sits in a High Velocity Hurricane Zone, the only coastal area in Duval County with this designation. Any substantial remodel triggers an inspection, and older Therma-Tru doors with plain annealed glass won’t pass. We retrofit with laminated impact-rated glass or replace the slab where the frame can’t accept it.
Therma-Tru Service in Jacksonville Beach: What Local Conditions Mean for Your Equipment
Jacksonville Beach is in a High Velocity Hurricane Zone, and that designation changes the math on every Therma-Tru door west of the dunes. A door that passed code in 2005, when the old Florida Building Code treated this area differently, may not pass a re-roof or our Window Replacement in Jacksonville Beach inspection today. We run into this constantly on the 1950s concrete block ranches near the ocean and the newer stilt-built homes along the intracoastal. The homeowner replaces a roof, the inspector walks the permit, and now the original Therma-Tru Classic-Craft entry system, a model we genuinely like, is flagged because the glass isn’t impact-rated and the frame lacks the pressure rating the updated code demands. At that point, retrofitting laminated impact glass into the existing slab and upgrading the hardware is usually the path that keeps the job moving without a full-door replacement. The threshold has to be rated too, and the frame anchors have to match the new DP rating. It’s the one local fact that separates Jacksonville Beach service work from every other beach town: the code here is stricter, and the inspection is real.
Therma-Tru Models & Products We Service in Jacksonville Beach
We service the full Therma-Tru residential line: Classic-Craft, Fiber-Classic, Smooth-Star, and Pulse entry systems, plus the doorlites, sidelites, and transoms that frame them. We also handle Therma-Tru French and double door assemblies, including our Window Installation in Jacksonville Beach for impact-rated patio doors on newer stilt-built homes. Our parts approach is simple: genuine Therma-Tru weatherstripping, corner seal pads, and adjustable sills whenever the factory still makes them, and corrosion-resistant stainless aftermarket hardware where salt air demands better than original spec. We keep common Jacksonville Beach parts on the truck: threshold caps, corner pads, latch adapters, stainless hinge sets, and 316-grade screws. When a replacement slab is needed, we measure on site, order the exact size and swing, and schedule installation once the door arrives. No guesswork from a catalog.
Therma-Tru Service Pricing in Jacksonville Beach
Most Therma-Tru service visits in Jacksonville Beach run between $125 and $275 for diagnosis and minor repairs: weatherstripping replacement, hinge screw upgrades, latch and deadbolt recalibration, threshold adjustments. Full doorlites or sidelite glass replacement typically lands between $350 and $850 depending on glass size and impact rating. A complete slab replacement, including new weatherstripping, stainless hardware, and frame anchoring, runs $1,800 to $4,500 installed, with impact-rated glass pushing the higher end. The exact number depends on your door’s exposure, frame condition, and access. Our estimate is written down before work begins, and the price does not move at the door. Call (904) 513-9670 to schedule a free estimate and we’ll measure, quote, and hand you the numbers in writing.
Serving Jacksonville Beach, FL - Our Local Coverage Area
We’re based in the Jacksonville Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Windows & Doors in Jacksonville Beach
In most cases, yes, if the fiberglass skin is intact and the frame is still square. We replace the non-impact glass with laminated impact-rated glass, upgrade the threshold to a rated model, and replace hinge and threshold screws with stainless. If the slab has warped or delaminated, retrofit work doesn’t make economic sense and we’ll quote a replacement. Call (904) 513-9670 for an evaluation and a written number.
Fiberglass expands in the heat, and Jacksonville Beach’s summer humidity swells the wood frame behind the door. If the gap at the latch side was cut too tight during installation, or if the frame was not properly anchored, the door binds against the strike plate from June through September. A technician can fix this by resetting the hinges, adjusting the threshold, or re-shimming the frame. It’s a two-visit fix at most.
For a direct ocean exposure, we recommend the Therma-Tru Classic-Craft or Fiber-Classic with impact-rated laminated glass and stainless steel hardware from day one. The Smooth-Star line works well for interiors or protected entries. The door slab matters less than the hardware and glazing package. Salt air will find cheap screws and break down zinc plating in under a decade, so stainless is the first thing we spec.
Nine times out of ten it’s the corner seal pads and weatherstripping. The pads at the bottom corners take the brunt of Jacksonville Beach’s wind-driven rain, and once they compress or crumble, water runs down the seam and into the threshold. The hinges can be a factor if the doors have sagged and broken the seal line, but the corner pads are the usual culprit. We replace both in one visit and test with a hose before we leave.
Fiberglass holds up better than either wood or steel, but it’s not immune. Wood rots at the bottom rail and jamb. Steel rusts at the stile edges and threshold. Therma-Tru fiberglass survives the salt itself, but the hardware, weatherstripping, and corner seal pads all degrade faster than the slab. Expect to replace weatherstripping every 4 to 6 years on an oceanfront home, and upgrade hinges to stainless if you haven’t already. Call (904) 513-9670 for a maintenance check and we’ll tell you what’s due now and what can wait.
Service Areas Near Jacksonville Beach
We work throughout Jacksonville Beach and the beaches corridor. That includes Jacksonville Beach service area neighborhoods from the oceanfront to the intracoastal, plus Atlantic Beach, Therma-Tru service in Neptune Beach, Ponte Vedra Beach, and Therma-Tru service in Jacksonville for inland homes east of the St. Johns River. If you’re within 20 minutes of the beach, we’re probably already working your block.
Book Your Therma-Tru Service in Jacksonville Beach Today
Call (904) 513-9670 to schedule a free estimate for Therma-Tru repair, retrofit, or replacement in Jacksonville Beach. We answer live, we show up on time, and the price goes on paper before the first screw turns. Measure twice, quote once. Everything after that is just showing up.
Written by Elliot Vance, Owner at Meridian Windows and Doors Jacksonville, serving Jacksonville Beach since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Jacksonville
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.