New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Jacksonville pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Awning & Hopper Windows in Jacksonville, FL
Awning windows hinge at the top and open outward from the bottom, which lets you keep them open during a Florida rainstorm without water pouring into the house. Hopper windows flip that design: they hinge at the bottom and open inward from the top, making them a common choice for basement wells, bathrooms, and tight wall spaces where an outward swing isn’t practical. Both styles run narrower and wider than a double-hung, so they fit where other windows won’t. If you’re replacing windows in Jacksonville and want ventilation that works with the weather instead of against it, call Meridian Windows and Doors Jacksonville at (904) 513-9670 for a written quote.
This page is part of our broader Window Installation service. If you’re weighing awning windows against sliders or casements, that parent page covers the full comparison. Here, we’re focused on the two styles Jacksonville homeowners ask about most for hard-to-fit openings.
Key Takeaways
- Awning windows open outward from the bottom hinge; hopper windows open inward from the top hinge. Both fit short, wide openings where double-hungs don’t work.
- Most awning or hopper window replacements in Jacksonville run $420-$780 per window installed, depending on size, frame material, and glass package. Larger coastal-rated units from PGT or CGI run higher.
- Awning windows are the better pick for most Jacksonville homes because they seal tighter in wind-driven rain. Hoppers make sense in basements, laundry rooms, and above ground-level bathroom windows.
- Every installation from Meridian Windows and Doors Jacksonville carries a written 365-Day Done Right Promise. If the window fails within a year, we come back at no charge.
- A live person answers our phones 24/7 at (904) 513-9670. You won’t get a voicemail loop.
When You Need Awning & Hopper Windows
Most Jacksonville homes were built with some combination of single-hung, double-hung, and sliding windows. Awning and hopper styles solve problems those standard windows can’t, just as Casement Windows solve different challenges. Here’s what we see on service calls across Duval County, from Riverside to Mandarin to the Beaches:
- Your window opening is wider than it is tall. Double-hungs get heavy and awkward past about 36 inches wide. Awning windows are engineered for exactly that proportion, and they operate with a simple crank instead of a lift.
- You want ventilation during afternoon thunderstorms. In Jacksonville, summer rain comes almost daily. An awning window’s top hinge creates a natural awning effect, so you can leave it open and let air move without soaking the sill or the floor. That’s the single biggest reason we install more awnings than hoppers in this market.
- You have a basement window well or a low wall opening. Hopper windows open inward from the top, which means they don’t swing out into a window well or a walkway. If your San Marco or Springfield home has an older basement, a hopper replacement gives you ventilation and an egress path code inspectors accept.
- The existing window is in a hard-to-reach spot. Above a kitchen sink, behind a bathtub, high on a stair landing. A crank-operated awning window works where you can’t lean over to push a sash up.
- You’re tired of water intrusion at the sill. Jacksonville’s wind-driven rain finds every weak seal. Awning windows compress their weatherstripping when closed and the sash overlaps the frame on all four sides, which is a tighter seal than a sliding or double-hung design.
- You need a window that meets Florida building code for wind load. Awning windows are inherently strong in that short-wide configuration. Paired with impact-rated glass from PGT or CGI, they handle the wind loads required in coastal and near-coastal zones of Jacksonville without adding a separate shutter system.
If you’re unsure whether an awning or a hopper is right for a specific opening, we’ll tell you during the estimate. That’s part of the job: measuring, looking at the wall, and recommending the window that actually fits, not the one that’s easiest to order.
Our Awning & Hopper Windows Process
We run every awning and hopper installation through the same eight-step sequence we use on all window jobs in Jacksonville. The steps are written down, the price is written down, and the guarantee is written down. Here’s how it works:
- Call or book the estimate. A live person answers at (904) 513-9670. We schedule a time that works for you. No call centers, no “we’ll get back to you.”
- Site measurement and opening inspection. Our technician measures every opening, checks the rough frame for rot or termite damage, and looks at how the existing window was flashed. In Jacksonville’s humidity, wood rot in the rough opening is common in homes built before 1990. We find it before we quote it, not after we tear the old window out.
- Written quote with the exact product specified. You get a line-item price on paper before any work starts. It includes the window model, frame material, glass package, and labor. The price does not move at the door. If we find something unexpected during install, we stop and talk to you first.
- Product ordering and lead time confirmation. Shelly orders the window from one of our eight manufacturer lines. We tell you the expected delivery date when you sign, and we call if there’s any change.
- Old window removal and rough opening prep. Our crew removes the existing window, cleans the opening, repairs any minor frame damage, and installs new flashing per the manufacturer’s spec. We follow The Garrison Code on every site: drop cloths down, work area cleaned at the end of each day, no shortcuts on flashing or sealant.
- New window installation and leveling. The new awning or hopper goes in, gets shimmed level and square, and is fastened to the rough opening. Crank hardware is adjusted so it operates smoothly with one hand.
- Interior and exterior sealing. We seal the exterior perimeter against water intrusion and the interior gap with backer rod and a clean caulk line. Sloppy caulk is the most common complaint we hear about other contractors. We put a straight, consistent bead on every joint.
- Walkthrough and documentation. You see the window operate, we review the care instructions, and we hand you the written 365-Day Done Right Promise. If something fails within that year, the second visit is free. It’s in the document.
Awning & Hopper Windows Pricing in Jacksonville
Most awning and hopper window replacements in Jacksonville run $420 to $780 per window installed for standard sizes in vinyl or aluminum frames with clear or basic low-E glass. That’s the honest range we quote most often for single-window replacements in homes across the city.
What moves the price:
- Frame material. Vinyl is the most common and the lowest cost. Aluminum costs more but allows thinner frames for more glass area. Wood or wood-clad runs the highest and requires more maintenance in Jacksonville’s humidity.
- Glass package. Basic insulated glass with low-E coating (a thin coating that reflects heat while letting light through) is the standard we recommend for most Jacksonville homes. Impact-rated glass from PGT or CGI adds significant cost, but it’s required in some coastal zones and worthwhile if you’re replacing windows anyway in a home within a mile or two of the Intracoastal.
- Window size. An awning window at 24 x 16 inches costs less than one at 48 x 24. Hopper windows are typically smaller, which keeps their price in the lower half of the range.
- Hardware upgrades. Folding crank handles, egress hinges, or keyed locks add $40 to $120 per window depending on the hardware line.
- Condition of the rough opening. If the existing frame has rot or the opening needs reframing, that labor and material gets added to the written quote. We flag it during the estimate so there are no surprises.
Here’s a breakdown of what we typically quote in Jacksonville for a complete awning window replacement, installed:
| Scope | Typical Range | Notes |
|---|---|---|
| Standard vinyl awning window, 36″ x 24″, basic low-E | $460 – $620 installed | Most common quote we write |
| Standard vinyl hopper window, 30″ x 18″, basic low-E | $420 – $560 installed | Basement or utility room install |
| Aluminum awning window, 36″ x 24″, low-E | $540 – $720 installed | Thinner frame, more glass area |
| Impact-rated awning window (PGT or CGI), 36″ x 24″ | $780 – $1,100 installed | Required in some coastal zones |
| Full-home awning window replacement (8-12 windows) | $4,800 – $11,000 total | Volume pricing applied on written quote |
Every quote comes in writing before we order a single window. If you want to know exactly what your specific openings will cost, call (904) 513-9670 and we’ll schedule the measurement. The estimate is free, and it takes about 45 minutes.
What Sets Meridian Windows and Doors Jacksonville Apart
We’re not the cheapest window contractor in Jacksonville, and we won’t pretend to be. We’re the contractor that shows up when we say we will, prices the job honestly on paper, and stands behind the work for a full year. Here’s what that means in practice:
- The 365-Day Done Right Promise. Every awning or hopper window we install is covered in writing for 365 days. If the window fails, the hardware breaks, or the seal leaks within that year, we come back and fix it at no charge. No fine print about labor exclusions. The document says what it says.
- Written price before work starts. The price you sign is the price you pay. If we discover something during install that changes the scope, we stop, show you what we found, and get your signature on a new number before proceeding. No door-knocking price adjustments.
- Background-checked, uniformed technicians. The person who measures your window is the same person who installs it. Every technician on a Meridian job site has been background-checked, wears a Meridian uniform, and works to The Garrison Code, which covers everything from floor protection to daily cleanup to how we communicate a change order.
- Live-person phone coverage, 24/7. We answer the phone at (904) 513-9670 with a person. Not an answering service, not a voicemail. If you call at 2 a.m. with a broken window or a question about your quote, a human picks up.
- Eight manufacturer lines, spec’d for the job. We’re authorized to install and replace products from PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For awning and hopper windows in Jacksonville, we most often spec PGT or CGI when impact rating matters, and ViewLux or CWS for standard vinyl and aluminum units. The right window for the opening, not the window that happens to be in the warehouse.
A meridian is a fixed line you measure everything against. That’s what the name means and how we run every install. Elliot Vance founded the Jacksonville operation on that standard, and it hasn’t moved.
Awning Windows vs. Hopper Windows: Which One Belongs in Your Jacksonville Home
Both styles share the same basic geometry: a short, wide sash with a hinge on one edge and a crank or lever on the other. The difference is direction. That single difference determines where each window belongs in a Florida house.
Awning Windows: The Rain-Ready Workhorse
Awning windows hinge at the top and swing outward from the bottom. When open, the glass panel itself forms a small roof over the opening. During a Jacksonville summer downpour, water hits the glass and runs off to the sides, not into the house. That’s the reason we recommend awning windows for any room where you want to keep windows open during the rainy season: kitchens, living rooms, bedrooms, and covered porches. If you want a window that projects outward and adds interior space, ask us about Bay & Bow Windows as well.
Awning windows also seal tighter than most other operable window styles. When the sash closes, it presses into a full perimeter of weatherstripping. In wind-driven rain, that compression seal holds. We’ve replaced double-hungs and sliders in Riverside and Avondale where the water was coming in at the meeting rail; the awning replacements have stayed dry through two hurricane seasons.
Hopper Windows: The Interior-Swing Solution
Hopper windows hinge at the bottom and open inward from the top. The sash tilts into the room, which means the window never occupies exterior space. That makes hoppers the correct choice for basement window wells, walkway-adjacent openings, and any ground-level window where an outward swing would hit a bush, a fence, or a person walking by.
In Jacksonville, hoppers show up most often in three places: older home basements in Springfield and Riverside, utility rooms, and bathrooms where the window sits low on the wall. They’re also the standard choice when replacing a steel basement window that’s rusted out. The inward tilt gives you full ventilation without requiring any clearance outside.
How to Decide
If the window is above ground level and gets regular rain exposure, choose an awning. If the window is at or below grade, in a window well, or in a spot where exterior clearance is tight, choose a hopper. If you’re not sure, measure the opening and call us. We’ll tell you what fits and why, and we’ll put it in the written quote.
Glass Packages for Jacksonville’s Climate
Jacksonville sits in a mixed-humid climate zone. That means our windows need to do two things at once: block solar heat gain during long summers and retain conditioned air during short winters. The glass package matters as much as the frame.
We recommend the following glass configurations for awning and hopper windows in this market:
- Low-E insulated glass. A low-E coating is a thin metallic layer that reflects infrared heat while letting visible light through. In Jacksonville, low-E glass keeps more heat out of the house during summer, which reduces AC load. This is our standard recommendation.
- Impact-rated laminated glass. Required in coastal and near-coastal zones, available from PGT (WinGuard) and CGI (Sentinel). Laminated glass has an inner layer that holds the glass together if something hits it. If you’re in Neptune Beach, Atlantic Beach, or anywhere east of the Intracoastal, this is the glass we’ll spec.
- Tinted or low-solar-gain coatings. For west-facing windows that get hammered by afternoon sun, we can add a tinted interlayer or a low-solar-gain low-E coating to cut heat gain further. This is a worthwhile upgrade for any window that faces the afternoon sun in Jacksonville.
We’ll walk through the options during the estimate and give you a line-item price for each glass package so you can compare the numbers yourself.
FAQs – Awning & Hopper Windows
How much does an awning window cost in Jacksonville?
An awning window replacement in Jacksonville typically costs $420 to $780 per window installed for standard vinyl or aluminum units, with impact-rated options from PGT or CGI running $780 to $1,100 per window. The final price depends on size, frame material, and glass package. Call (904) 513-9670 for a free written quote on your specific openings.
Can I leave awning windows open during a Jacksonville rainstorm?
Yes, that’s the primary advantage of awning windows in Florida’s climate. The top-hinged sash angles outward and down, so rain hits the glass and runs off to the sides instead of entering the house. They will keep moderate rain out while still allowing ventilation, though we recommend closing them during high-wind events.
Are hopper windows good for bathrooms in Jacksonville homes?
Hopper windows work well in bathrooms, especially when the window sits low on the wall or faces a walkway where an outward swing would be a problem. The inward tilt from the top provides ventilation and privacy, and the window seals tightly when closed. For privacy, we can install obscured or frosted glass in any hopper unit. For kitchens or plant nooks where you want a mini-greenhouse effect, consider Garden Windows instead.
Do awning windows meet Florida building code in Jacksonville?
Yes, awning windows meet Florida building code when properly specified and installed. In coastal and near-coastal zones within Duval County, you’ll need impact-rated glass or an approved shutter system. We spec PGT and CGI impact products for those areas and provide documentation with the installation. Your written quote will include any code-required glass upgrades for your specific address.
Ready to Get a Written Price?
If you’re replacing awning or hopper windows in Jacksonville, we’ll measure the openings, spec the right product from our manufacturer lines, and hand you a written price before any work begins. You’ll know the exact window model, the glass package, the labor, and the total. And you’ll have the 365-Day Done Right Promise in writing before we start. Call Meridian Windows and Doors Jacksonville at (904) 513-9670 to schedule your free estimate. A live person answers, day or night.
Written by Elliot Vance, Owner at Meridian Windows and Doors Jacksonville, serving Jacksonville.
Six Reasons Homeowners Choose Meridian Windows and Doors Jacksonville
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.