New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Jacksonville pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Window Installation: The Jacksonville Owner’s Guide
PGT window replacement in Jacksonville typically runs $450 – $950 per window installed for standard single-hung or casement units, with impact-rated PGT WinGuard models landing between $900 and $1,400 per opening. We stock the common PGT hardware, balances, and weatherstripping on our trucks, so most single-window jobs are finished the same day we start. The way most Jacksonville homeowners find the failing part is through the daily annoyances: the window won’t stay up, it’s fogged between the panes, or you can feel the humidity bleeding through the frame in August.
Which PGT Models This Applies To
Our window replacement crews at Meridian Windows and Doors Jacksonville install and service the full PGT lineup that is common across Jacksonville neighborhoods from San Marco to Bartram Park. The series you are most likely to have on your home are the PGT SpectraGuard, WinGuard, or the older Classic and 3500-series single-hungs. The fastest way to identify your window is to look at the top edge of the lower sash or along the side frame rail, where PGT stamps a small white or silver label with the model, size code, and glass make-up. That label is the key that eliminates guesswork. If the label has faded in the Florida sun, we measure the visible glass width and the frame-to-frame opening, then match it against the series hardware differences. For instance, PGT balances are not universal across the line: a 3500-series block-and-tackle balance is a different length and weight rating than what a SpectraGuard takes, and putting the wrong one in will just wear the new part out in a season. We always fit OEM PGT parts when the window is still under warranty, but for older units that are out of warranty, a correct aftermarket balance or weatherstripping from a supplier we trust holds up just as well and saves you real money. Since we are an independent service provider and not affiliated with PGT, we spec parts based on fit and track record, not a brand allegiance.
Signs Your PGT Window Installation Is Failing
- The sash drops when you let go. That means the balances, the coiled or spring-loaded mechanisms inside the side rails, have lost tension. In Jacksonville, the constant humidity plus the salt air closer to the beaches shortens the life of the internal springs.
- You can feel hot air seeping around the edges in summer. The weatherstripping and the pile seals along the sash have compressed and dried out. When those seals go, your A/C is quietly cooling the shrubs outside.
- Condensation between the two panes that never clears. The insulated glass unit has lost its argon fill and seal. There is no field repair for this; the glass unit gets replaced.
- The window is hard to crank, lock, or slide. The operator, pivot bar, or roller assembly is worn or bent. Forcing it usually bends the hardware further, so address it before the frame gets stressed.
- The frame shows visible rot, mildew, or soft spots at the sill corners. Water has been getting behind the old caulk or through a failed seal at the drip edge. A soft sill is not a hardware fix; it is a frame-replacement discussion.
Replacement Cost & What’s Included
For a full single-window replacement in Jacksonville with a PGT or PGT-compatible unit, plan for $450 – $950 installed, and $900 – $1,400 for impact glass that meets coastal code requirements. Hardware-only repairs, meaning new balances or weatherstripping without replacing the glass, usually fall between $185 and $390 per window depending on which series you own. The price we put in writing before work begins covers the part, the labor, the disposal of the old sash or glass, and the new caulk line. We do not hand over a low number and then surprise you with a change order at the door; the written quote is the price. Every installation is covered by our 365-Day Done Right Promise, which says plainly that if the window fails within a year, we return and fix it at no charge.
DIY or Call Us?
There is a narrow band of work a careful homeowner can handle. Cleaning the track, checking that the locking points are aligned, and spotting a torn weatherstrip are all reasonable and safe. The moment the repair involves removing the sash, working with a tensioned balance spring, or lifting a heavy impact-glass panel, stop. A balance cartridge holds enough stored tension to remove a thumbnail or crack a window frame if it releases wrong, and impact glass is heavy enough to hurt you or the opening you are working in. We regularly replace sashes and hardware in Jacksonville homes where a weekend fix turned a $200 hardware job into a full frame replacement. If you are not certain, call (904) 513-9670 and we will talk through what you are seeing before you pick up a screwdriver.
FAQs
PGT frames and hardware generally hold up for 20 to 30 years in Jacksonville’s climate, but the seals and balances fail before the frame does. Expect weatherstripping to need replacement around 8 to 12 years, and balance springs or glass seals to go between 10 and 15 years, sooner if the window faces full sun or sits within a mile of the St. Johns River or the coast.
Yes, about 70% of the failed PGT windows we see in Jacksonville are fixed with a new balance, seal, or operator rather than a full window replacement. The exceptions are fogged glass, a rotted or twisted frame, or damaged impact glass, all of which require replacing the unit. Call (904) 513-9670 for an honest read on which path fits your window.
Most single-window replacements in Jacksonville take two to three hours once the part or glass unit is on hand, including the caulk and cleanup. If you have several windows or the frame needs repair under the siding line, we tell you the timeline in writing before work starts. You will not get a one-day promise that turns into a three-day project.
We stock the common PGT balance sizes, locks, weatherstripping, and sweep seals on our service vehicles, so most hardware repairs can be completed on the first visit. For impact-glass units and less common series, we order the exact size from our suppliers and schedule the install once it arrives. Same for parts from CGI, CWS, and ES Windows when the home has a mixed window lineup.
Call Meridian Windows and Doors Jacksonville
If your PGT window is not holding, sealing, or locking the way it should, we will measure it, quote it in writing, and stand behind the repair or replacement for a full year. That is the Garrison Standard we have run on since 2009, and it is why homeowners call us from Riverside, Mandarin, and the Beaches. To schedule your free estimate, call (904) 513-9670 and talk to a live person, any hour, any day.
Written by Elliot Vance, Owner, Meridian Windows and Doors Jacksonville at Meridian Windows and Doors Jacksonville, serving Jacksonville and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Jacksonville
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.